flush door single
raw material different sheet to make flush doors
Flush Doors, Moulded Skin Doors, Pine Wood Doors, Block Board, Medium Density Fiber and Plywood Sheet. its raw materials and modern machines. This ensures the product’s standard of quality.
Wooden Fire Rated Door
Product Description
These doors are installed in buildings to segregate its different compartments effectively. By separating the different parts of a building, these doors delay the spread of fire and smoke. Depending upon the fire hazard associated with the building, these doors act as barriers to the passage of smoke and fire to varying degrees based on its location. These doors are easy to install and maintain CLASSIFICATION OF WOODEN DOOR
Vision Panel
Glazed Door
Glazed Partition & Windows
45mm Thick Wooden Fire Door of 30 minutes Fire Rating
120 x 60mm thick wooden frame
10 X 4mm thick fire seal
5mm thick F.R. insulation filler
16mm thick non combustible board.
4mm (Nominal) thick commercial ply.
SPECIFICATIONS
FRAME:- Supply of door frames made out Hardwood of size 120 x 60 mm suitable for Fire Resistance Shutters of 30 minutes, with heat activated Intumescent fire seal strips of size 10 x 4 mm provided in grooves on all three sides of the frame.
SHUTTER:- Supply of 45mm thick asbestos free composite fire and smoke check wooden shutter of 30 minutes rating similar to the prototype tested and certified at CBRI Roorkee and confirming to BS: 476 part-22 & IS: 3614 part-II comprising of 15mm thick fire resistance insulation filler sandwiching with two 12mm thick non Combustible boards with 75 x 39mm hardwood internal timber frame work and faced with 3mm thick commercial ply on both sides with hardwood lipping on all around the shutter with heat activated in tumescent fire seal strips of size 10 x 4mm on all sides of the shutter except bottom.
42mm Thick Wooden Fire Door of 60 minutes Fire Rating
120x60mm thick wooden frame.
10x4mm thick fire seal.
10mm thick F.R. INSULATION filler.
12mm thick non combustible board.
4mm thick commercial ply.
SPECIFICATIONS
FRAME:- Supply of door frames made out Hardwood of size 120 x 60 mm suitable for Fire Resistance Shutters of 60 minutes, with heat activated Intumescent fire seal strips of size 10 x 4 mm provided in grooves on all three sides of the frame.
SHUTTER:- Supply of 42mm thick asbestos free composite fire and smoke check wooden shutter of 60 minutes rating similar to the prototype tested and certified at CBRI Roorkee and confirming to BS: 476 part-22 & IS: 3614 part-II comprising of 12mm thick fire resistance insulation filler sandwiching with two no 12mm thick non Combustible boards with 70 x 36mm hardwood internal timber frame work and faced with 3mm thick commercial ply on both sides with hardwood lipping on all around the shutter with heat activated in tumescent fire seal strips of size 10 x 4mm on all sides of the shutter except bottom.
46mm Thick Wooden Fire Door of 120 minutes Fire Rating
120x60mm thick wooden frame.
10x4mm thick fire seal.
38mm thick excellent - core.
4mm thick ply on both sides
SPECIFICATIONS
FRAME:- Supply of door frames made out Hardwood of size 120 x 60 mm suitable for Fire Resistance Shutters of 120 minutes, with heat activated Intumescent fire seal strips of size 10 x 4 mm provided in grooves on all three sides of the frame.
SHUTTER:- Supply of 46mm thick asbestos free composite fire and smoke check wooden shutter of 120 minutes rating similar to the prototype tested and certified at CBRI Roorkee and confirming to BS: 476 part-22 & IS: 3614 part-II comprising of 16mm thick fire resistance insulation filler sandwiching.
Product Specification
| Usage/Application | Home |
| Model No | Simpolo |
| Surface Laminated | PVC Foil |
| Thickness HDF Plain | 32 mm,35 mm |
| Single Core Flush Door | 30 mm |
| Double Core Flush Door | 32 mm |
| Width | 24 inch to 72 inch |
| Height | 72 inch to 96 inch |
| HDF Sheet | 2.5-4 mm |
raw material different sheet to make flush doors
Flush Doors, Moulded Skin Doors, Pine Wood Doors, Block Board, Medium Density Fiber and Plywood Sheet. its raw materials and modern machines. This ensures the product’s standard of quality.
Wooden Fire Rated Door
Product Description
These doors are installed in buildings to segregate its different compartments effectively. By separating the different parts of a building, these doors delay the spread of fire and smoke. Depending upon the fire hazard associated with the building, these doors act as barriers to the passage of smoke and fire to varying degrees based on its location. These doors are easy to install and maintain CLASSIFICATION OF WOODEN DOOR
Vision Panel
Glazed Partition & Windows
45mm Thick Wooden Fire Door of 30 minutes Fire Rating
120 x 60mm thick wooden frame
10 X 4mm thick fire seal
5mm thick F.R. insulation filler
16mm thick non combustible board.
4mm (Nominal) thick commercial ply.
SPECIFICATIONS
FRAME:- Supply of door frames made out Hardwood of size 120 x 60 mm suitable for Fire Resistance Shutters of 30 minutes, with heat activated Intumescent fire seal strips of size 10 x 4 mm provided in grooves on all three sides of the frame.
SHUTTER:- Supply of 45mm thick asbestos free composite fire and smoke check wooden shutter of 30 minutes rating similar to the prototype tested and certified at CBRI Roorkee and confirming to BS: 476 part-22 & IS: 3614 part-II comprising of 15mm thick fire resistance insulation filler sandwiching with two 12mm thick non Combustible boards with 75 x 39mm hardwood internal timber frame work and faced with 3mm thick commercial ply on both sides with hardwood lipping on all around the shutter with heat activated in tumescent fire seal strips of size 10 x 4mm on all sides of the shutter except bottom.
42mm Thick Wooden Fire Door of 60 minutes Fire Rating
120x60mm thick wooden frame.
10x4mm thick fire seal.
10mm thick F.R. INSULATION filler.
12mm thick non combustible board.
4mm thick commercial ply.
SPECIFICATIONS
FRAME:- Supply of door frames made out Hardwood of size 120 x 60 mm suitable for Fire Resistance Shutters of 60 minutes, with heat activated Intumescent fire seal strips of size 10 x 4 mm provided in grooves on all three sides of the frame.
SHUTTER:- Supply of 42mm thick asbestos free composite fire and smoke check wooden shutter of 60 minutes rating similar to the prototype tested and certified at CBRI Roorkee and confirming to BS: 476 part-22 & IS: 3614 part-II comprising of 12mm thick fire resistance insulation filler sandwiching with two no 12mm thick non Combustible boards with 70 x 36mm hardwood internal timber frame work and faced with 3mm thick commercial ply on both sides with hardwood lipping on all around the shutter with heat activated in tumescent fire seal strips of size 10 x 4mm on all sides of the shutter except bottom.
46mm Thick Wooden Fire Door of 120 minutes Fire Rating
120x60mm thick wooden frame.
10x4mm thick fire seal.
38mm thick excellent - core.
4mm thick ply on both sides
SPECIFICATIONS
FRAME:- Supply of door frames made out Hardwood of size 120 x 60 mm suitable for Fire Resistance Shutters of 120 minutes, with heat activated Intumescent fire seal strips of size 10 x 4 mm provided in grooves on all three sides of the frame.
SHUTTER:- Supply of 46mm thick asbestos free composite fire and smoke check wooden shutter of 120 minutes rating similar to the prototype tested and certified at CBRI Roorkee and confirming to BS: 476 part-22 & IS: 3614 part-II comprising of 16mm thick fire resistance insulation filler sandwiching.
No comments:
Post a Comment